Introduction | Cut Wire Shot | Product List | Comparison & Advantages | Knowledge Base | Photos | About Us | Contact us |
 
 
PRODUCT LIST

Conditioned BAPSHOT

Semi-Conditioned BAPSHOT

Cylindrical BAPSHOT
(Cut wire shot) is available in Carbon and Stainless Steel, Aluminum, Zinc, Plastic and in all commonly used sizes.
SIZE
CUT WIRE
DESIGNATION
(INCH)
CUT WIRE
DESIGNATION
(MM)
EQUIVALENT
CAST STEEL SHOT
SIZE
CW 12 0.30 S-110
CW 14 0.35 S-130
CW 17 0.45 S-170
CW 20 0.50 S-190
CW 23 0.60 S-230
CW 28 0.70 S-280
CW 32 0.80 S-330
CW 35 0.90 S-360
CW 41 1.00 S-390
CW 47 1.20 S-460
CW 54 1.40 S-550
CW 62 1.60 S-660
MATERIAL
Mild Steel
Carbon Steel
Stainless Steel

Aluminium
Zinc
Type 1020
Type 1070
Type 302, Type 304, Type 430

98.9%

HARDNESS RANGE
Mild Steel 1020
Carbon Steel 1070
StainlessSteel302/304
24-30 HRC
40-50/45-55HRC
32 HRC minimum
SHAPE DESCRIPTION SPECIFICATION
As Cut (-U) Cylindrical with Sharp Edge SAE J441/IS 5873-1970/VDFI 8001/AMSI 2431/3/4/8
Normal (-C) Corner pre round SAE J441/IS 5873-1970/VDFI 8001/AMSI 2431/3/4/8
Conditioned (-3C) Almost Spherical SAE J441/IS 5873-1970/VDFI 8001/AMSI 2431/3/4/8

M/s Ashtavinayak Enterprises Indore product range also includes Cut-Wire shot of M.S., High carbon steel , Aluminum, steel, Zinc, stainless steel and Steel Grit.

Also in house wire drawing facility of various grades of steel wire i.e. Low, medium and high carbon steel, co2 welding wires, welding electrodes quality steel wire in the sizes range from 12.00 mm up to 0.50 mm in diameter.

Packing: 25 kg bags
 
  Copyright © 2007 BAPSHOT. All Rights Reserved.